Advantec MFS Inc.
Mfg Item # : 311409
Ground glass connection points Funnel, Base, and Flask Sintered glass, Stainless steel, or PTFE filter support Borosilicate glass filter holder assemblies for the microanalysis of liquids for biological or particulate contamination under vacuum. The All-Glass design restricts contact with reactive surfaces such as steel or rubber to minimize contamination of filtrate. The 300mL graduated funnel mounts on the 1L flask by way of a 40/35 ground glass joint. The outlet tube of the support base is positioned below the the side arm connection of the the flask to prevent aspiration of the sample into the vacuum line. The anodized aluminum clamp secures the 47mm membrane between the funnel and base. While the sintered glass frit support base can be used for general filtration, the 304 stainless steel screen(w/ PTFE gasket) is recommended for viscous or proteinaceous solutions to maximize flow rate and the screen ensures particles will not be shed into the filtrate. The PTFE support can filter acidic solutions at a higher flow rate.  Unit includes: Funnel, Base/Support(gasket w/ screen), Clamp, Flask Please Note: ALL Advantec items have a maximum 48 hour cancellation window. Any cancellations AFTER the 48 hour window will incur a restocking fee equal to the cost of the product.

Advantec MFS Inc.
Mfg Item # : 311410
Ground glass connection points Funnel, Base, and Flask Sintered glass, Stainless steel, or PTFE filter support Borosilicate glass filter holder assemblies for the microanalysis of liquids for biological or particulate contamination under vacuum. The All-Glass design restricts contact with reactive surfaces such as steel or rubber to minimize contamination of filtrate. The 300mL graduated funnel mounts on the 1L flask by way of a 40/35 ground glass joint. The outlet tube of the support base is positioned below the the side arm connection of the the flask to prevent aspiration of the sample into the vacuum line. The anodized aluminum clamp secures the 47mm membrane between the funnel and base. While the sintered glass frit support base can be used for general filtration, the 304 stainless steel screen(w/ PTFE gasket) is recommended for viscous or proteinaceous solutions to maximize flow rate and the screen ensures particles will not be shed into the filtrate. The PTFE support can filter acidic solutions at a higher flow rate.  Unit includes: Funnel, Base/Support(gasket w/ screen), Clamp, Flask Please Note: ALL Advantec items have a maximum 48 hour cancellation window. Any cancellations AFTER the 48 hour window will incur a restocking fee equal to the cost of the product.

Advantec MFS Inc.
Mfg Item # : 311420
Ground glass connection points Funnel, Base, and Flask Sintered glass, Stainless steel, or PTFE filter support Borosilicate glass filter holder assemblies for the microanalysis of liquids for biological or particulate contamination under vacuum. The All-Glass design restricts contact with reactive surfaces such as steel or rubber to minimize contamination of filtrate. The 300mL graduated funnel mounts on the 1L flask by way of a 40/35 ground glass joint. The outlet tube of the support base is positioned below the the side arm connection of the the flask to prevent aspiration of the sample into the vacuum line. The anodized aluminum clamp secures the 47mm membrane between the funnel and base. While the sintered glass frit support base can be used for general filtration, the 304 stainless steel screen(w/ PTFE gasket) is recommended for viscous or proteinaceous solutions to maximize flow rate and the screen ensures particles will not be shed into the filtrate. The PTFE support can filter acidic solutions at a higher flow rate.  Unit includes: Funnel, Base/Support(gasket w/ screen), Clamp, Flask Please Note: ALL Advantec items have a maximum 48 hour cancellation window. Any cancellations AFTER the 48 hour window will incur a restocking fee equal to the cost of the product.

Fischer Technical Part No. LAV-3/G
Two Stage: Produces 1-micron ultimate Pressure                          Rotary Sliding Vane: Provides 85 liter per minute (3cfm) capacity and operates quietly Direct Drive: Reduces space needed Gas Ballast: Helps purge moisture from vacuum system          Trap:     Reduces risk of oil sucked back into the system This direct drive pump provides the best Performance/Cost Ratio available today. Comes complete with initial supply of High Vacuum Pump Oil.  Ready to Operate Our reliable, rotary vane type, low cost two-stage high vacuum pump operates quietly. Available in 3cfm (cubic feet per minute), 5cfm, 7cfm, 10cfm. All pumps are also available in 220V. The motor is ½ horepower and features 1725 RPM.  The hose barb is 3/8” OD for 3/8” ID tubing on the 3cfm and 5cfm models and 1/2” OD for 1/2” ID tubing on the 7cfm and 10cfm. Operating temperature is 30º F to 170ºF.  Ideal for use with vacuum ovens, bell jars, desiccators, and many more applications. Pumps achieve an ultimate vacuum of 25 microns in laboratory conditions. Tubing with 2ea. hose clamps, 1/2"ID.  For use with all Fischer Technical "LAV" series high vacuum pumps. High Vacuum Pump Oil Designed specifically for use with Fischer Technical  Company High Vacuum Pumps.  This non-detergent high vacuum pump oil is hydro processed to attain its stable, viscous and refined properties.  This process also results in a clear mineral oil that will alert of contamination sooner if the oil becomes milky or cloudy. High Vacuum Grease This vacuum grease helps provide a proper seal between the vacuum pump plate and the bell jar so that high vacuum pressures can be achieved. "The Tank" Oil Change System All vacuum pumps require changing oil after every use. Contaminated oil, laden with moisture and acid will damage pumps and shorten pump life. On top of that, deep vacuums cannot be achieved with contaminated oil. Maintaining clean oil in your pump will ensure that your pump will operate at peak efficiency. No More Mess & Spills Environmentally Friendly!  The Tank is Easy to Use: Turn black cap counterclockwise to open. Place vacuum pump in the cradle and drain pump. Once the pump has finished draining, turn the black cap clockwise to close after every use. Holds up to 5 oil changes. Vacuum Gauge and Fittings Bourdon tube vacuum gauge and fittings to add to your Fischer Technical company LAV series high vacuum pumps. Ships complete with gauge, fittings, and sealant.

Automatic Self-Zeroing Buret Closed system borosilicate glass buret. Plastic push-button stopcock. Preset drop speed for repeat titrations. Silk-screen blue graduations. Accuracy is Class B. With polyethylene bottle filling tube and plastic stopcock. Reservoir 1000mL. Capacity 50mL. Exact Match 17579-518

Labconco 5535700 Vacuum Tubing Kit
For vacuum desiccator cabinet. Includes two 1.22m tubes, inner diameters of 6.35mm and 12.7mm. 2 each 6.35mm and 12.7mm tubing clamps. 6.35mm to 12.7mm barbed reducer. Exact Match 24982-012

WELCH VACUUM BY GARDNER DENVER
Mfg Item # : 3200B-01
Digital Peristaltic Pump 115V, 60Hz. With head, console drive, and starter tubing kit (7.6m of 4.8mm O.D. general PVC tubing; 4 hose clamps; 2 each of 1.6mm, 3.2mm, and 4.8mm O.D. silicone tubing cartridges). Bi-directional speed control. Flow rate: 3-300mL/min. Speed: 20-200rpm. 17.8Lx19Wx14Hcm.
Exact Match: 84009-700

The improved StepSaver™ is completely manufactured out of durable PVC and plastic materials. This compact, single-place station has a small footprint to save valuable benchtop space. These stations can be daisy-chained together to run multiple samples at once for a faster sample throughput. The improved StepSaver still meets the EPA Method 1664 requirements for Oil and Grease extractions. The StepSaver allows the analyst to collect the solvent with eluted oil and grease directly into a collection flask eliminating the need to disassemble or reassemble glassware. As the eluent enters the collection flask it passes through a drying cartridge to remove any excess water so it is ready to be evaporated without a separate drying step. It's easy and efficient. Simply pour your sample into the disposable funnel on the extraction side which is on the right side of the unit. Our patented UltraPrep® extraction disks don't need to be activated with methanol before use nor do they need to be kept wetted. With the vacuum on, turn the large stopcock to allow the sample waste to pour off into the waste carboy. Once the sample has completely gone to waste, continue pulling vacuum for 5 minutes to allow the residual water in the disk to be removed. Next, turn the large stopcock to the closed position and move the disposable filter funnel to the elution side, which is located on the left side of the unit. Add n-Hexane to the funnel to elute the oil and grease from the extraction disk. Turn the small stopcock to allow the n-Hexane to pass through the Na2SO4 drying cartridge and into the collection flask. Transfer your sample to a preweighed aluminum pan being sure to rinse the flask thoroughly. Your sample is ready to be evaporated. Compact, single-place station with a small footprint. Dimensions: 10.5"L x 7"W, Single stations can be daisy-chained, together to run multiple samples at once for a faster sample throughput, Unit is made of durable PVC and plastic materials, Meets EPA Method 1664 requirements for Oil and Grease extractions, Uses disposable filter funnels* assembled with the extraction disk so clean-up is quick and easy eliminating the risk of cross-contamination *Options for Classic StepSaver™ glass funnels as well, Two separate chambers for extraction and elution help keep water out of your extract, Flexibility to choose your evaporation vessel; unit can accommodate pre-weighed StableWeigh™ vessels, a pre-weighed aluminum pan, or a pre-weighed Classic StepSaver™ flask Unit comes with the following Equipment and Consumables: 1-StepSaver Base – Assembled, 1-Inner Sleeve, 1-Tall Outer Sleeve, 1-Short Outer Sleeve , 2-Lid for 47mm Funnel , 2-1/4" Hose Barb, 1-Nylon Plug , 1-Male Luer Sodium Sulfate Cartridge Connector, 2-47mm Fluorosilicone Sealing Gasket, 1-Clamp for 47mm Funnel, 1-20-Liter Waste Carboy with 1/4" ID Tubing (10ft) & Fittings, 1-100mL Collection Flask, round bottom, 2-Disposable Funnels w/47mm UltraPrep Disk, 20pk (GUPF47EE), 1-Aluminum Weigh Dish, 105mm, 100pk (F93140DSH), 1-5.5 Gram Na2SO4 Drying Cartridge, 50pk (G1065), 1-O/G MDL Standard, 10mL tubes, 7mg HEM, 20pk (G3023), 1-O/G Standard, 10mL tubes, 40mg HEM, 20pk (G3025).

BD 260608 GasPak 150* Large Anaerobic Vented Jar
1 jar. Replacement part for GasPak 150 vented anaerobic system (BB4360629). Complete with vent installed, rubber tube, and tubing clamp. Exact Match 90003-586

BD 260609 GasPak 150* Vent Kit
1 kit. For converting GasPak 150 non-vented system BB4360628 to vented system BB4360629. Contains threaded vent, rubber tube, and tubing clamp. Exact Match 90003-588