IKA WORKS INCORPORATED Part No. 1234500
Thomas No. 1203C01 For use with various types of vessels by means of universal, infinitely variable clamping rolls. Dimensions: (W x D x H): 325 x 234 x 88 mm Set-up plate: 220 x 220 mm Weight: 850 g Thomas No. 8289S27 For processing round flasks, measuring flasks and Erlenmeyer flasks. Please order fixing clips separately. . Dimensions: (W x D x H): 230 x 230 x 24 mm Weight: 650 g Thomas No. 8289S31 For smooth shaking operations in the low viscosity range, e.g. Petri dishes or culture bottles. With integrated slip-resistant foil (PP). Dimensions: (W x D x H): 420 x 270 x 32 mm Set-up plate: 220 x 340 mm Weight: 370 g Thomas No. 8289S33 For intensive shaking, e.g. small tubes, test tubes, cuvettes, centrifuge tubes. Dimensions: (W x D x H): 220 x 230 x 95 mm Capacity: 64 Vessel diameter: 10 - 16 mm Min. height of the vessel: 80 mm Weight: 670 g Thomas No. 1203C02 For various types of vessels. Infinitely variable clamping rolls allow universal adaptation to the vessels. Dimensions: (W x D x H): 425 x 335 x 135 mm Set-up plate: 320 x 320 mm Weight: 1600 g Thomas No. 1203C03 For shaking flasks, Erlenmeyer flasks and bottles with a round crosssection (without fixing clips). Dimensions: (W x D x H): 330 x 330 x 24 mm Weight: 1290 g Thomas No. 1203C04 For smooth movement for cell cultures, nutrient media in Petri dishes, culture bottles and vessels with a low center of gravity. With integrated slip-resistant foil (PP). Thomas No. 1203C05 For shaking out, salting out, extracting, eluting, enriching. The 3 clamping rolls (included in delivery) are height-adjustable for adaption to different separating funnel sizes. The separating funnels are secured with O-rings (5 O-rings included). Dimensions: (W x D x H): 334 x 425 x 145 mm Weight: 1550 g Thomas No. 8289T12 For various types of vessels with a minimum volume of 50 ml. Ideally more than 250 ml. The clamping rolls may be adjusted to two levels. Dimensions: (W x D x H): 480 x 500 x 120 mm Set-up plate: 420 x 420 mm Weight: 4000 g Thomas No. 8289T14 For shaking flasks, Erlenmeyer flasks and pear-shaped flasks (without fixing clips). Dimensions: (W x D x H): 475 x 460 x 95 mm Weight: 2640 g Thomas No. 8289T16 For smoothly shaking dishes, but also for smooth mixing in vessels with a large, flat bottom (wide-necked Erlenmeyer flasks and beakers). A plastic foil with mild adhesive prevents the vessel from slipping. Dimensions: (W x D x H): 450 x 450 x 45 mm Set-up plate: 420 x 420 mm Weight: 1120 g Thomas No. 8289T18 For shaking out, eluting, extracting, gassing out, dissolving, enriching, etc. Adjustment for the clamping rolls is infinitely variable, the set-up height can be changed by means of clamping devices. Dimensions: (W x D x H): 480 x 505 x 190 mm Weight: 4180 g Thomas No. 8289T20 For shaking out, eluting, extracting, gassing out, dissolving, enriching, etc. Adjustment for the clamping rolls is infinitely variable, the set-up height can be changed by means of clamping devices. Dimensions: (W x D x H): 480 x 505 x 190 mm Weight: 3720 g Thomas No. 8289T22 For shaking out, eluting, extracting, gassing out, dissolving, enriching, etc. Adjustment for the clamping rolls is infinitely variable, the set-up height can be changed by means of clamping devices. This attachment will hold 4 x 1,000 ml separating funnels. Dimensions: (W x D x H): 480 x 505 x 225 mm Weight: 5500 g Thomas No. 8289S16 For flask volume 25 mL Thomas No. 8289S18 For flask volume 50 mL Thomas No. 8289S20 For flask volume 100 mL Thomas No. 8289S22 For flask volume 200/250 mL Thomas No. 8289S24 For flask volume 500 mL Thomas No. 1205X14 For flask volume 1000 mL Thomas No. 1205X15 New universal adhesive mat for the fixing clip attachments of shakers. Ideal for frequently changing vessel types and sizes Self-adhesive Vessels can be easily removed thanks to side tilting movement Suitable for disinfection Dimensions (W x D x H): 200 x 200 mm Permissible ambient temperature: 5- 80ºC Max. speed: 300 rpm  

Eppendorf North America
Mfg Item # : AG-00
NBS offers a variety of options for safely securing test tubes, flasks and plates to your shaker. The Universal Platform provides the flexibility for mixing different size test tubes and glassware on a single platform. Numerous mounting holes allow you to add and interchange clamps and test tube racks, at your discretion. Clamps and racks sold separately. Utility Carrier includes two adjustable bars and non-skid rubber mat. Utility Tray, for low-speed applications, allows quick addition or removal of flasks, plates or tubes. A non-skid rubber mat is provided. Sticky Tape and Sticky Pad are an alternative to flask clamps for securing vessels to a shaker platform. Both are ideal for containers such as bottles and dishes that cannot be held with conventional flask clamps. With flasks, these products can be used at speeds of up to 200 to 300 RPM depending on orbit diameter, flask size and load. Sticky Tape comes in a roll, 16.4' (5 m) long x 1.6 (4 cm) wide and can be used several times before losing its adhesive properties. Sticky Pad is 20 cm x 20 cm (7.9 inches square) and can be re-generated to like-new condition by washing with mild detergent and water. Neither can be used in water baths. For best performance, Sticky Pad should be used on an anodized aluminum substrate. Test Tube Racks have an adjustable angle and tube height support. Made from stainless steel with inserts to help retain tubes and prevent them from spinning in rack. Finger-tight knobs let you quickly adjust angle or release rack from base plate for easy transport to the bench. Microplate Holders available in two styles. The single layer style will hold five standard or deep well plates. The stacked plate style will hold up to nine standard or 3 deep well plates. Both holders are used with Universal Platforms.

EPPENDORF NORTH AMERICA Part No. M1194-9909
NBS offers a variety of options for safely securing test tubes, flasks and plates to your shaker. The Universal Platform provides the flexibility for mixing different size test tubes and glassware on a single platform. Numerous mounting holes allow you to add and interchange clamps and test tube racks, at your discretion. Clamps and racks sold separately. Utility Carrier includes two adjustable bars and non-skid rubber mat. Utility Tray, for low-speed applications, allows quick addition or removal of flasks, plates or tubes. A non-skid rubber mat is provided. Sticky Tape and Sticky Pad are an alternative to flask clamps for securing vessels to a shaker platform. Both are ideal for containers such as bottles and dishes that cannot be held with conventional flask clamps. With flasks, these products can be used at speeds of up to 200 to 300 RPM depending on orbit diameter, flask size and load. Sticky Tape comes in a roll, 16.4' (5 m) long x 1.6 (4 cm) wide and can be used several times before losing its adhesive properties. Sticky Pad is 20 cm x 20 cm (7.9 inches square) and can be re-generated to like-new condition by washing with mild detergent and water. Neither can be used in water baths. For best performance, Sticky Pad should be used on an anodized aluminum substrate. Test Tube Racks have an adjustable angle and tube height support. Made from stainless steel with inserts to help retain tubes and prevent them from spinning in rack. Finger-tight knobs let you quickly adjust angle or release rack from base plate for easy transport to the bench. Microplate Holders available in two styles. The single layer style will hold five standard or deep well plates. The stacked plate style will hold up to nine standard or 3 deep well plates. Both holders are used with Universal Platforms.

Eppendorf Part No. M1191-9910
NBS offers a variety of options for safely securing test tubes, flasks and plates to your shaker. The Universal Platform provides the flexibility for mixing different size test tubes and glassware on a single platform. Numerous mounting holes allow you to add and interchange clamps and test tube racks, at your discretion. Clamps and racks sold separately. Utility Carrier includes two adjustable bars and non-skid rubber mat. Utility Tray, for low-speed applications, allows quick addition or removal of flasks, plates or tubes. A non-skid rubber mat is provided. Sticky Tape and Sticky Pad are an alternative to flask clamps for securing vessels to a shaker platform. Both are ideal for containers such as bottles and dishes that cannot be held with conventional flask clamps. With flasks, these products can be used at speeds of up to 200 to 300 RPM depending on orbit diameter, flask size and load. Sticky Tape comes in a roll, 16.4' (5 m) long x 1.6 (4 cm) wide and can be used several times before losing its adhesive properties. Sticky Pad is 20 cm x 20 cm (7.9 inches square) and can be re-generated to like-new condition by washing with mild detergent and water. Neither can be used in water baths. For best performance, Sticky Pad should be used on an anodized aluminum substrate. Test Tube Racks have an adjustable angle and tube height support. Made from stainless steel with inserts to help retain tubes and prevent them from spinning in rack. Finger-tight knobs let you quickly adjust angle or release rack from base plate for easy transport to the bench. Microplate Holders available in two styles. The single layer style will hold five standard or deep well plates. The stacked plate style will hold up to nine standard or 3 deep well plates. Both holders are used with Universal Platforms.

Freezing Point Apparatus Consists of vacuum flask jacketed sample tube brass packing gland stirrer stopper clamps and stand. Uses acetone or alcohol cooled by solid CO2 as cooling medium. Conforms to ASTM D2386 specifications. Exact Match 52932-022

Benchmark Scientific, Inc.
Mfg Item # : BT3001
High capacity, 24x125, 14x250, 9x500, 5x1L or 2x2L Digital, Touch-Screen control and accuracy Change and attach flask clamps is as little as one second with the unique MAGic Clamp platform The Orbi-Shaker ™ is the a compact orbital shaker with a powerful motor drive that can mix as many as five 1L flasks.  The convenient MAGic Clamp™ platform is also available for use with Erlenmeyer flasks and test tube racks.  The unique, magnetic attachment method is the easiest way to instantly change between flask clamps of different sizes. The powerful Orbi-Shaker is capable of mixing a 14lb load capacity up to speeds as high as 300 rpm. The standard platform (included) features a non-slip, rubber coated surface, ideal for tissue culture flasks, Petri dishes and staining trays. The convenient MAGic Clamp platform (patent pending) is also available for use with Erlenmeyer flasks and test tube racks. The unique, magnetic attachment method is the easiest way to instantly change between flask clamps of different sizes. Common applications include: Bacterial Suspensions, Tissue / Cell Culture, Solubility Studies, Staining / Destaining, Gel Washing, General Mixing

Pall Minimate Fitting Kit Contains: Male luer to 3.2mm (1/8”) hose barb, female luer to 3.2mm (1/8”) hose barb, 3.2mm (1/8”) i.d. tubing, tubing screw clamp, tubing clamps, adhesive strips (loop and hook), 1/PK
Minimate™ tangential flow filtration capsules enable concentration and diafiltration (desalting or buffer exchange) to be performed on the same system with minimal user intervention.

EBERBACH CORPORATION Part No. E6040
Holds various size and shape containers including test tube supports Slots in the four sides accommodate both cross-wise and length-wise bar clamps Aluminum box measures 18 x 12 x 4 inches high, with rubber-covered floor. Rubber-covered clamps may be secured anywhere in the slots by wing nuts. Utility of box can be increased by the addition of one or more vertical rods with supports in the corners of the box to which a variety of containers can be clamped. Complete with one cross-wise bar clamp, resilient mat and mounting screws.

BD 260467 GasPak 100* Vented Lid
1 lid. Replacement part for GasPak 100 vented anaerobic system (BB4360627). Complete with improved clamp/thumbscrew assembly, O-ring gasket, catalyst reaction chamber, two catalyst charges, rubber tube, and tubing clamp. Exact Match 90003-582

BD 260627 GasPak 100* Vented System
1 kit. Consists of the GasPak 100 polycarbonate jar, GasPak 100 vented lid with O-ring gasket, clamp, clamp screw and catalyst reaction chamber, two catalyst charges, one GasPak 100 rack, and one GasPak tube holder. Exact Match 90003-604