Search in Category
Filter Paper
Search term required.
Filter Your Search
Grade
Material
Name
Pore Size
Size
Sterility
Type
Browse Categories
Loading...
Filter Paper
Viewing Page 14 of 32
(320 results)
Filter Paper Blk Grade 8613 47mm 100/pk
Item #:
ETD/8613-0470
Supplier #: 8613-0470
Supplier #: 8613-0470
Black Filter Paper Circles 100 Circles/PK. 100PK/CS. 4.70cm diameter circles. Smooth Black Finish Visual Test Filter Paper. Weight 85g/m2 Thickness 0.18mm Herzberg 114sec/100ml Rapidity 60ml/min Capillary Rise 22mm Retention 4um 100% wood fiber. Exact Match 28342-020
Grade 992 Filter Paper 50cm PK/100
Item #:
ETD/9920-5000
Supplier #: 9920-5000
Supplier #: 9920-5000
10/packs of 100 per case. Sharkskin* General-Purpose Filter Paper. Qualitative Filter Paper
TCLP Glass Fiber Filters 47mm
Item #:
FIS/09-804-142H
Binder-free, borosilicate glass fiber filters have 0.7 micron pore size · 47mm size recommended for use with 09-753-1A Filter Holder in filtering highly granular samples or those with <10% solids · 90mm size recommended for use with 09-753-2.
Glass Funnel Support 300ml/1000ml 47mm
Item #:
KTS/953825-0000
Supplier #: 953825-0000
Supplier #: 953825-0000
All-Glass Funnel/Support Assembly Ultra-Ware 47mm Borosilicate glass. Integral vacuum connection above filtrate drip. With 300ml funnel coarse-porosity fritted-glass base with vacuum connection 1L inner joint flask. Aluminum clamp connects funnel and support base. 40/35 standard taper joints. Exact Match KT953825-0000
Glass Fiber TCLP Filter 142mm pk/100
Item #:
MFS/GF75142MM
Supplier #: GF75142MM
Supplier #: GF75142MM
Advantec MFS Inc.
Mfg Item # : GF75142MM
Advantec Glass Fiber Depth Filters feature high-loading capacity, fast flow rates, are highly resistant to chemical attack, and biologically inert. General purpose and clarifying filtration grades. Binder-free and thermostable to 500°C. Grade GA55 is a thin filter recommended for clarifying filtration and air pollution monitoring. Nominal Rating 0.6µm Grade GF75 collects very fine particles and has a high collection efficiency at 99.999%(DOP) and slower flow. Ideal for collecting IgG or other very fine protein precipitates. Use for TCLP EPA 1311. Nominal Rating 0.3µm(0.7µm) Grade GB140 is a thick filter with a high loading capacity. Used in industrial waste analysis and for suspended solids. Nominal Rating 0.4µm Grade GC50 is a thin filter recommended as a prefilter for membrane or suspended solids and pollutants in water. Low absorption makes this an ideal filter for scintillation counting. High Collection Efficiency(DOP) of 99.99%. Nominal Rating 0.5µm Grade GD120 has high wet strength and high-loading capacity. Ideal as prefilter for membrane <1.2µm. Nominal Rating 0.9µm Please Note: ALL Advantec items have a maximum 48 hour cancellation window. Any cancellations AFTER the 48 hour window will incur a restocking fee equal to the cost of the product.
Mfg Item # : GF75142MM
Advantec Glass Fiber Depth Filters feature high-loading capacity, fast flow rates, are highly resistant to chemical attack, and biologically inert. General purpose and clarifying filtration grades. Binder-free and thermostable to 500°C. Grade GA55 is a thin filter recommended for clarifying filtration and air pollution monitoring. Nominal Rating 0.6µm Grade GF75 collects very fine particles and has a high collection efficiency at 99.999%(DOP) and slower flow. Ideal for collecting IgG or other very fine protein precipitates. Use for TCLP EPA 1311. Nominal Rating 0.3µm(0.7µm) Grade GB140 is a thick filter with a high loading capacity. Used in industrial waste analysis and for suspended solids. Nominal Rating 0.4µm Grade GC50 is a thin filter recommended as a prefilter for membrane or suspended solids and pollutants in water. Low absorption makes this an ideal filter for scintillation counting. High Collection Efficiency(DOP) of 99.99%. Nominal Rating 0.5µm Grade GD120 has high wet strength and high-loading capacity. Ideal as prefilter for membrane <1.2µm. Nominal Rating 0.9µm Please Note: ALL Advantec items have a maximum 48 hour cancellation window. Any cancellations AFTER the 48 hour window will incur a restocking fee equal to the cost of the product.
Qualitative Filter Paper 11cm
Item #:
MFS/N0111.0CM
Supplier #: N0111.0CM
Supplier #: N0111.0CM
Advantec MFS Inc.
Mfg Item # : N0111.0CM
Advantec Qualitative Filter Papers are made of 100% cotton linter cellulose. Primarily used for clarifying and removing precipitates (ppt) and preparation for quantitative analysis. These papers can be used over a pH range from 0-12 and a maximum temperature of 120°C. Ash content of 0.1%. Papers have smooth surface, normal hardness (except Grade No. 101 have a creped surface). Grade No. 1 Retains coarse and gelatinous ppt with fast flow rate. Recommended for gas filtration, air pollution analysis, and general purpose. Nominal Retention: 6 µm. Grade No. 2 Retains medium crystalline ppt with high flow rate. General purpose filter. Nominal Retention: 5 µm. Grade No. 231 Retains crystalline ppt, moderate flow. Thin and slightly more retentive than No.1 general purpose paper. Nominal Retention: 5 µm. Grade No. 232 Collects medium to medium-fine ppt. Slow flow rate. Thin retentive paper. Nominal Retention: 3 µm. Grade No. 131 High retention efficiency for fine crystalline ppt like BaSO4. Slow flow. Higher wet strength and will withstand suction. Nominal Retention: 3 µm. Grade No. 235 Highest retention efficiency collecting very fine ppt. Very slow flow rate. Nominal Retention: 1 µm. Grade No. 101 Creped filter paper captures large particles. Fast flow rate. Excellent for seed germination and viscous fluids. Nominal Retention: 7 µm. Please Note: ALL Advantec items have a maximum 48 hour cancellation window. Any cancellations AFTER the 48 hour window will incur a restocking fee equal to the cost of the product.
Mfg Item # : N0111.0CM
Advantec Qualitative Filter Papers are made of 100% cotton linter cellulose. Primarily used for clarifying and removing precipitates (ppt) and preparation for quantitative analysis. These papers can be used over a pH range from 0-12 and a maximum temperature of 120°C. Ash content of 0.1%. Papers have smooth surface, normal hardness (except Grade No. 101 have a creped surface). Grade No. 1 Retains coarse and gelatinous ppt with fast flow rate. Recommended for gas filtration, air pollution analysis, and general purpose. Nominal Retention: 6 µm. Grade No. 2 Retains medium crystalline ppt with high flow rate. General purpose filter. Nominal Retention: 5 µm. Grade No. 231 Retains crystalline ppt, moderate flow. Thin and slightly more retentive than No.1 general purpose paper. Nominal Retention: 5 µm. Grade No. 232 Collects medium to medium-fine ppt. Slow flow rate. Thin retentive paper. Nominal Retention: 3 µm. Grade No. 131 High retention efficiency for fine crystalline ppt like BaSO4. Slow flow. Higher wet strength and will withstand suction. Nominal Retention: 3 µm. Grade No. 235 Highest retention efficiency collecting very fine ppt. Very slow flow rate. Nominal Retention: 1 µm. Grade No. 101 Creped filter paper captures large particles. Fast flow rate. Excellent for seed germination and viscous fluids. Nominal Retention: 7 µm. Please Note: ALL Advantec items have a maximum 48 hour cancellation window. Any cancellations AFTER the 48 hour window will incur a restocking fee equal to the cost of the product.
Qualitative Filter Papers No. 1 18.5cm
Item #:
MFS/N0118.5CM
Supplier #: N0118.5CM
Supplier #: N0118.5CM
Advantec MFS Inc.
Mfg Item # : N0118.5CM
Advantec Qualitative Filter Papers are made of 100% cotton linter cellulose. Primarily used for clarifying and removing precipitates (ppt) and preparation for quantitative analysis. These papers can be used over a pH range from 0-12 and a maximum temperature of 120°C. Ash content of 0.1%. Papers have smooth surface, normal hardness (except Grade No. 101 have a creped surface). Grade No. 1 Retains coarse and gelatinous ppt with fast flow rate. Recommended for gas filtration, air pollution analysis, and general purpose. Nominal Retention: 6 µm. Grade No. 2 Retains medium crystalline ppt with high flow rate. General purpose filter. Nominal Retention: 5 µm. Grade No. 231 Retains crystalline ppt, moderate flow. Thin and slightly more retentive than No.1 general purpose paper. Nominal Retention: 5 µm. Grade No. 232 Collects medium to medium-fine ppt. Slow flow rate. Thin retentive paper. Nominal Retention: 3 µm. Grade No. 131 High retention efficiency for fine crystalline ppt like BaSO4. Slow flow. Higher wet strength and will withstand suction. Nominal Retention: 3 µm. Grade No. 235 Highest retention efficiency collecting very fine ppt. Very slow flow rate. Nominal Retention: 1 µm. Grade No. 101 Creped filter paper captures large particles. Fast flow rate. Excellent for seed germination and viscous fluids. Nominal Retention: 7 µm. Please Note: ALL Advantec items have a maximum 48 hour cancellation window. Any cancellations AFTER the 48 hour window will incur a restocking fee equal to the cost of the product.
Mfg Item # : N0118.5CM
Advantec Qualitative Filter Papers are made of 100% cotton linter cellulose. Primarily used for clarifying and removing precipitates (ppt) and preparation for quantitative analysis. These papers can be used over a pH range from 0-12 and a maximum temperature of 120°C. Ash content of 0.1%. Papers have smooth surface, normal hardness (except Grade No. 101 have a creped surface). Grade No. 1 Retains coarse and gelatinous ppt with fast flow rate. Recommended for gas filtration, air pollution analysis, and general purpose. Nominal Retention: 6 µm. Grade No. 2 Retains medium crystalline ppt with high flow rate. General purpose filter. Nominal Retention: 5 µm. Grade No. 231 Retains crystalline ppt, moderate flow. Thin and slightly more retentive than No.1 general purpose paper. Nominal Retention: 5 µm. Grade No. 232 Collects medium to medium-fine ppt. Slow flow rate. Thin retentive paper. Nominal Retention: 3 µm. Grade No. 131 High retention efficiency for fine crystalline ppt like BaSO4. Slow flow. Higher wet strength and will withstand suction. Nominal Retention: 3 µm. Grade No. 235 Highest retention efficiency collecting very fine ppt. Very slow flow rate. Nominal Retention: 1 µm. Grade No. 101 Creped filter paper captures large particles. Fast flow rate. Excellent for seed germination and viscous fluids. Nominal Retention: 7 µm. Please Note: ALL Advantec items have a maximum 48 hour cancellation window. Any cancellations AFTER the 48 hour window will incur a restocking fee equal to the cost of the product.
Grade 131 70mm filter paper
Item #:
MFS/N01317.0CM
Supplier #: N01317.0CM
Supplier #: N01317.0CM
Advantec MFS Inc.
Mfg Item # : N01317.0CM
Advantec Qualitative Filter Papers are made of 100% cotton linter cellulose. Primarily used for clarifying and removing precipitates (ppt) and preparation for quantitative analysis. These papers can be used over a pH range from 0-12 and a maximum temperature of 120°C. Ash content of 0.1%. Papers have smooth surface, normal hardness (except Grade No. 101 have a creped surface). Grade No. 1 Retains coarse and gelatinous ppt with fast flow rate. Recommended for gas filtration, air pollution analysis, and general purpose. Nominal Retention: 6 µm. Grade No. 2 Retains medium crystalline ppt with high flow rate. General purpose filter. Nominal Retention: 5 µm. Grade No. 231 Retains crystalline ppt, moderate flow. Thin and slightly more retentive than No.1 general purpose paper. Nominal Retention: 5 µm. Grade No. 232 Collects medium to medium-fine ppt. Slow flow rate. Thin retentive paper. Nominal Retention: 3 µm. Grade No. 131 High retention efficiency for fine crystalline ppt like BaSO4. Slow flow. Higher wet strength and will withstand suction. Nominal Retention: 3 µm. Grade No. 235 Highest retention efficiency collecting very fine ppt. Very slow flow rate. Nominal Retention: 1 µm. Grade No. 101 Creped filter paper captures large particles. Fast flow rate. Excellent for seed germination and viscous fluids. Nominal Retention: 7 µm. Please Note: ALL Advantec items have a maximum 48 hour cancellation window. Any cancellations AFTER the 48 hour window will incur a restocking fee equal to the cost of the product.
Mfg Item # : N01317.0CM
Advantec Qualitative Filter Papers are made of 100% cotton linter cellulose. Primarily used for clarifying and removing precipitates (ppt) and preparation for quantitative analysis. These papers can be used over a pH range from 0-12 and a maximum temperature of 120°C. Ash content of 0.1%. Papers have smooth surface, normal hardness (except Grade No. 101 have a creped surface). Grade No. 1 Retains coarse and gelatinous ppt with fast flow rate. Recommended for gas filtration, air pollution analysis, and general purpose. Nominal Retention: 6 µm. Grade No. 2 Retains medium crystalline ppt with high flow rate. General purpose filter. Nominal Retention: 5 µm. Grade No. 231 Retains crystalline ppt, moderate flow. Thin and slightly more retentive than No.1 general purpose paper. Nominal Retention: 5 µm. Grade No. 232 Collects medium to medium-fine ppt. Slow flow rate. Thin retentive paper. Nominal Retention: 3 µm. Grade No. 131 High retention efficiency for fine crystalline ppt like BaSO4. Slow flow. Higher wet strength and will withstand suction. Nominal Retention: 3 µm. Grade No. 235 Highest retention efficiency collecting very fine ppt. Very slow flow rate. Nominal Retention: 1 µm. Grade No. 101 Creped filter paper captures large particles. Fast flow rate. Excellent for seed germination and viscous fluids. Nominal Retention: 7 µm. Please Note: ALL Advantec items have a maximum 48 hour cancellation window. Any cancellations AFTER the 48 hour window will incur a restocking fee equal to the cost of the product.
