Washers
Viewing Page 1 of 2
(14 results)
Kimwipes Delicate Task Wipers
Item #:
VAN/89218-057
Supplier #: 89218-057
Supplier #: 89218-057
KIMBERLY-CLARK CORP (WIPERS)
Mfg Item # : 34120
KIMWIPES* Delicate Task Wipers, 4.4in x 8.4in, single ply, light-duty
Exact Match: 89218-057
Mfg Item # : 34120
KIMWIPES* Delicate Task Wipers, 4.4in x 8.4in, single ply, light-duty
Exact Match: 89218-057
VAKUWASH,CUVETTE WASHER
Item #:
BEL/38960-0000
Supplier #: 38960-0000
Supplier #: 38960-0000
Vakuwash Cell Washer For washing rinsing and drying interior of cuvettes or test tubes. Liquid poured into 89mm funnel is sprayed into cell then drains to flask. Air flow facilitates drying. Includes 500mL polypropylene vacuum flask and Vikem vinyl stopper and tube Exact Match 58020-014
Pipette Washer Automatic
Item #:
DYN/215905
Supplier #: 215905
Supplier #: 215905
Dynalab Corporation
Mfg Item # : 215905
High quality and high speed Kartell Automatic Pipette/Burette Washing Set. Solves the problem of washing pipettes up to 600mm long and Mohr burettes quickly and safely. Indispensable in the laboratory where radioactive, caustic and toxic materials are in use. The PE rinser fills via the spray nozzle situated on the top rim. This eliminates backsymphoning as the water inlet is located above and away from any contaminated waters. Contaminated waters will syphon out totally, once the syphon point at the top of the rinser has been reached, via the large diameter drain situated at lowest point, before refilling automatically. During washing the pipettes/burettes are housed in specially designed baskets which minimize breakages as it buffers the tips of pipettes against the soft PE base. Since soaking takes the longest time, two or three baskets of pipettes/ burettes can be soaking in their jars whilst another basket full is being washed in the rinser. On the botton connection for outlet tubing (not included; Ø inner tube: 13mm).
Mfg Item # : 215905
High quality and high speed Kartell Automatic Pipette/Burette Washing Set. Solves the problem of washing pipettes up to 600mm long and Mohr burettes quickly and safely. Indispensable in the laboratory where radioactive, caustic and toxic materials are in use. The PE rinser fills via the spray nozzle situated on the top rim. This eliminates backsymphoning as the water inlet is located above and away from any contaminated waters. Contaminated waters will syphon out totally, once the syphon point at the top of the rinser has been reached, via the large diameter drain situated at lowest point, before refilling automatically. During washing the pipettes/burettes are housed in specially designed baskets which minimize breakages as it buffers the tips of pipettes against the soft PE base. Since soaking takes the longest time, two or three baskets of pipettes/ burettes can be soaking in their jars whilst another basket full is being washed in the rinser. On the botton connection for outlet tubing (not included; Ø inner tube: 13mm).
FlaskSrubber Glassware Washer w/ Heat
Item #:
LCC/4420421
Supplier #: 4420421
Supplier #: 4420421
Washer, Glassware; Labconco; FlaskScrubber; Freestanding; Maximum water temperature: 93deg.C (199deg.F); Dimensions: 24.2 w x 27.5 d x 34.2-36.2 in. h; 208/230V 50/60Hz, 12A; 1/EA Exact Match 10359113 97001-166
SteamScrubber Washer, Undercounter
Item #:
LCC/4400320
Supplier #: 4400320
Supplier #: 4400320
Washer, Glassware; Labconco; SteamScrubber; Undercounter; Maximum Water Temp. 82C (180F); 24.1 in. w x 27.4 in. d x 34.1-36.1 in. h; 115V 60Hz, 16A; 1/EA Exact Match 10359100 97001-140